Advanced UV stabilizers ensure maximum color retention and a long-lasting finish. A perfect pairing with ourtopside and antifouling paints. ft. per gallon @ 3 mils dry film thickness, VOC Content (Admixed): Surfacing Primer, <420 g/L; High Build Primer, <350 g/L, Thinner: TotalBoat Epoxy Primer Thinner 200, Surface Prep Solvent: TotalBoat Epoxy Primer Thinner 200, Cleanup Solvent: TotalBoat Epoxy Primer Thinner 200, TotalBoat 2-Part Epoxy Surfacing Primer Tech Data, TotalBoat 2-Part Epoxy High-Build Primer Tech Data, 2-Part Epoxy Primer Surfacing Activator SDS, 2-Part Epoxy Primer High Build Activator SDS, TotalBoat Epoxy Primer Thinner 200 Tech Data, TotalBoat TotalProtect Epoxy Barrier Coat Primer. Do not use this product on corroded aluminum, as it will cause further corrosion. Via microscopy, eight morphospecies were identified. FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! $51.99 - $124.99 TotalProtect Epoxy Barrier Coat Primer You should use a 1.1mm tip when spraying. Surfacing primer is ideal for faired surfaces that are ready for topcoat. Fiberglass constructions (polyester resin, epoxy-carbon-kevlar) Boat paint job (primer-polyourethane-acryllic-metallic colors-varnish) Boat spot repairs (gel coat-polyourethane-metallic colors) Fix small & big fiberglass repairs Detailing Boat building Vacuum Infusion method Let's be in touch! for pricing and availability. TotalBoat Topside Primer is intended for topside finishes. ), and the primer will not adhere properly. TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (White, Gallon) 800 2 offers from $109.99 Product information Warranty & Support If you'd like a copy of the manufacturer's warranty for a product found on Amazon.com, you can contact the manufacturer directly or visit their website for more information. Besides being an effective, impermeable barrier coating on fiberglass hulls, TotalProtect has great adhesion and corrosion-protection benefits as an epoxy primer on all metal substrates. Rust Primer is not a finish product; use to isolate rust prior to priming and painting. Painting a fiberglass boat with Rust-Oleum is certainly rewarding both for you and your boat. TotalBoat Wet Edge is easy to apply by brushing, rolling & tipping, or spraying. No. Dont be intimidated by this, just be aware of it. Wood Sealer essentially eliminates the need for this, and its lower solids content means it already flows markedly better than unthinned varnish. Lightly sand the TotalBoat Topside Primer with 220-grit or 320-grit sandpaper and remove any sanding residue prior to applying TotalBoat Wet Edge. Of course, you can spray it on if you want to, but simple rolling and tipping produce praiseworthy results. After mixing thoroughly, allow a 15-minute induction period before reduction (optional) and application. Its best to use the roll and tip method with a brush and roller. Redtree Industries 36031 Mohair Mini Paint Roller Cover - 4", 10 Pack. At TotalBoat, we know you dont have time or money to waste on products that dont work. Other authors The recommended temperature for application is 50 90F. TotalBoat Aluminum Boat Barrier Coat can be recoated over itself for up to 60 days. Especially if its outdoors, and the varnish finish will be exposed to sun, salt, and harsh weather.Make 1-part varnish finishes look better and last longer by coating new or bare wood with TotalBoat Wood Sealer first. The maximum overcoat window (without sanding) is 48 hours. Keep in mind that because plywood is so porous, it may require 3 coats of TotalBoat Wood Sealer.In addition, oily hardwoods like teak and mahogany also need to be sealed to prevent their natural oils from lifting varnish or paint coatings. Thin with TotalBoat Special Brushing Thinner 100 when brushing, and TotalBoat Spray Thinner 101 when spraying. Thats why we offer only the highest quality goods at the best possible prices. a company called fiberglast sells the gelcoat and pva much cheaper than any marine supply. Totalboat 24/7 Support Need help or have questions? We used it as the second coat of primer for the floor of an 18 foot world boat skiff that my grandson and I are building. TotalBoat 2-Part Epoxy Primer should cure for at least 5-7 days at minimum under proper curing conditions prior to applying any gelcoat to the surface. It does not need to be sanded between coats. Thats why we offer only the highest quality goods at the best possible prices. Our marine paint primers, barrier coats, and fairing compounds fill imperfections and form a binding layer for smoother, more durable finishes. TotalBoat Elixir Troubleshooting Guide. Just remember always to brush from the wet edge into new paint, then leave it alone and itll lay down flat, smooth, and glossy. Water (up to 20%, but is usually not needed). Using Rust Primer to encapsulate and convert rust to an inert material is the perfect first step before applying primer. When its dry, just sand lightly, wipe clean, and apply your topside finish. Brightwork on boats, strip canoes, kayaks, TotalBoat Special Brushing Thinner 100 for brushing and rolling applications; TotalBoat Spray Thinner 101 for spraying and cool weather brushing/rolling applications, TotalBoat Dewaxer & Surface Prep or TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101. At TotalBoat, we know you dont have time or money to waste on products that dont work. Be aware that this thick primer does not have the smooth sanding characteristics of an epoxy surfacing primer. Dry times depend on temperature. Rust-Oleum 7769502 Protective Enamel Paint Stops Rust, 32-Ounce, Flat Rusty Metal Primer Sealing filler primers and fairing compounds before applying one-part and two-part urethane topcoats. Use it with either of the TotalBoat 1-part varnishes Lust Marine Spar Varnish or Gleam 2.0 Spar Varnish, which dont require sanding between coats, either. Effective tie-coat primer ensures paint sticks stronger and lasts longer. TotalBoat Epoxy Primer Thinner 200 or TotalBoat Dewaxer & Surface Prep, 225 sq ft/gal (at 7 mils wet, not accounting for waste). 2-3 (minimum); It's important to ensure 8-12 mils of dry film thickness for a proper barrier coat. High-build Aluminum Boat Barrier Coat can fill tiny scratches, but its not a filler. FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! Your best option is to measure your boat to estimate total square feet you need to cover. Compatible with all antifouling paints and other one- and two-part finishes. Surfacing Primer Base and High Build Primer Base available in Gray or White. Can be welded through (wire brush the area after to remove slag, then reapply Rust Primer). Yes, it should be fine to apply over an oil-based stain. #3. Pressure Pot: the pressure should be 3.44-4.47 bar/50-65 psi (gun pressure), and 8-10 psi (pot pressure . It is a very thin liquid, with a consistency close to water. It also provides superior corrosion protection on underwater metals. This primer can be applied by brush (natural bristle, solvent-safe), roller (3/16 nap or foam solvent-safe roller cover), or spray (conventional, airless, or HVLP). We always recommend testing in an inconspicuous spot.Make sure the stain is completely dry before applying Wood Sealer. UV-stable, flexible finish has great color retention and won't chip, fade, or peel. Wet Edge can also be sprayed. Apply a primer coat. This 2-part, high-build epoxy primer features anti-corrosive properties ideal for protecting underwater metals like lead, bronze, cast iron, stainless, and aluminum. To launch, it is critical to let TotalProtect dry a minimum of 12 hours at 90F, 24 hours at 70F, and 5 days at 50F. For interior and exterior use above the waterline. Overcoating Aluminum Boat Barrier Coat with Antifouling Bottom Paint. Nap rollers leave small hairs, as well as a stippled effect in the paint that will stand out once it cures, and will generally lay down too much paint for a proper cure. to something good iron phosphate a very stable something that prevents further corrosion. We already used this product for both the first and second coats of the sides inside and out. Second, this thin varnish primer also bonds to the wood and creates a level foundation for finish coats of varnish to bond to, so they dont lift in large sections later. If theres epoxy on your thumb, its too soon. You will need to sand down and wipe clean. We made sure theres enough room in there. Help Center. Phosphoric acid-based formula is not as harsh as hydrochloric/muriatic acid rust removers. The minimum time before overcoating with varnish is 24 hours. Mix well. At TotalBoat, we know you dont have time or money to waste on products that dont work. TotalBoat Topside Primer is a premium marine undercoat compatible with one-and two-part topside finishes for use above the waterline. TotalProtect is also flexible and can take the tough pounding and movement a hull undergoes without cracking or lifting. Let the primer dry. White residue is a normal byproduct of the chemical reaction. Aluminum Boat Barrier Coat Epoxy Primer is not a finish. ), Surface prep solvent: TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or, Cleanup solvent: TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or TotalBoat Dewaxer & Surface Prep, Wet Edge Classic Whaler Blue SDS - Gallon. Its easy to mix and use, but if youre new at this, you may want to start with a test batch to hone your technique. Because this is a high-solids primer, its designed to be applied thinly to seal the surface, not in thick coats to fill surface imperfections. Converts rust to an inert substance and leaves a protective coating that prevents further rusting. This marine topside boat paint can be used on fiberglass, wood, or previously painted surfaces above the waterline. Product Troubleshooting Guide. A quart of Rustoleum is $22, so a gallon of total boat is actually cheaper if you have a lot of boat to paint. The FAQs in our Help Center cover most account, order, or product-related topics. Water cant get in to do damage. Works on all types of new or bare wood, including plywood and oily woods like teak and mahogany. Sale, Decrease quantity for Premium Marine Topside Primer, Increase quantity for Premium Marine Topside Primer, Surface Prep Solvent: TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or, Cleanup Solvent: TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or TotalBoat Dewaxer & Surface Prep. Updated. Sale, Decrease quantity for Rust Primer Metal Treatment, Increase quantity for Rust Primer Metal Treatment. High-build epoxy primer for corrosion protection or osmotic blister prevention, Wood, fiberglass, metals, and previously painted surfaces in good condition (except for 1-part paints), Antifouling paints, topside paints, urethanes, Brush: (natural bristle, solvent safe); Roll: (3/16" - 3/8" nap or foam solvent-safe roller cover), or Spray: Conventional, airless, HVLP, 2-3 coats (minimum), when using a 3/8" roller cover; 3-4 coats, when using a 1/4" roller cover; 4-5 coats, when using a 3/16" roller cover, TotalBoat Epoxy Primer Thinner 200 or TotalBoat Dewaxer & Surface Prep, 225 sq ft/gal (at 7 mils wet, not accounting for waste), Corrosion protection and waterproofing/water barrier on aluminum and underwater metals, Aluminum and previously painted surfaces in good condition (not 1-part paints), Antifouling paints, topside paints, and urethanes, Brush: (natural bristle, solvent safe); Roll: (3/8" nap or foam solvent-safe roller cover); or Spray: Conventional, airless, HVLP. Yes, it does contain 25-50% phosphoric acid that converts rust to an oxide that is paintable. The surfacing primer is great for overcoating, color matching, and improving adhesion, while the high-build primer is best for surface defects. Unlike some other products on our list, you cannot use this one as an adhesive. Recoating Aluminum Boat Barrier Coat with Aluminum Boat Barrier Coat. It seals the wood fibers and fills the grain to smooth out the surface, removing highs and lows so varnish can be applied to a uniformly level surface, without thinning first.TotalBoat Wood Sealer has a light amber color that enhances the natural beauty of bare wood. How to use: TotalBoat TotalTread JamestownTV 33.3K subscribers Subscribe Share 23K views 8 years ago This video how to explains how to use TotalBoat TotalTread non-skid deck paint by Jamestown. It is compatible with fiberglass, metals, wood, and previously painted surfaces in good condition (compatible over 2-part paints ONLY). 320-400 wet dry sanding pad (thin sponge with silicone carbibe glued to one side) works very well for contoured surfaces. Copper-free biocide is safe for aluminum hulls, aluminum pontoons, and underwater metal parts on submerged running gear, such as outdrives & trim tabs. Pain the aluminum with at least two coats of an appropriate type of paint. Be sure to apply thin coats. You will want to use a wire brush to remove any loose metal or scale beforehand, and any powdery residue after it is dry. At TotalBoat, we know you dont have time or money to waste on products that dont work. For scratches, dings, and dents 116 deep or greater, use TotalFair epoxy fairing putty first, then sand smooth and overcoat. Otherwise its easy to mix the entire batch at once. Once you've wiped down the entire area with a tack cloth, it's time to apply your first coat of primer. The ideal pre-varnish treatment, it contains UV filters, and requires no sanding between coats. boat paint & solvents marine primer Marine Primer 44 Items Sort By Price INTERLUX InterProtect 2000E Barrier Coat System $85.99 - $358.99 Compare PETTIT PAINT Pettit Protect High Build Epoxy Primer Kits $79.99 - $164.99 Compare PETTIT PAINT 6980 Rustlok Steel Primer $64.99 - $157.99 Compare PETTIT PAINT EZ Prime Undercoater, White Overcoating Aluminum Boat Barrier Coat with Non-Antifouling or Topside Paint. See Epoxy Primer Thinner 200 data (below) for details on thinning the product, if desired. It creates a durable coating that adheres strongly to the surface, seals fairing work, and cures to a flexible film that wont cause one- and two-part urethane topcoats to lift, crack, or peel. Liquid error (sections/main-product line 237): Computation results in '-Infinity'% Wear protective gloves, clothing protection, eye/face protection, and a proper respirator when applying or sanding TotalBoat TotalProtect. Ask a Question. It is for interior and exterior use above the waterline. The nice thing about our epoxy primer system is that you dont need to use both primers on your project, just the one you need. It can be used on properly prepared fiberglass, wood, and previously painted surfaces in good condition. First, it prevents the finish coats of varnish or paint from sinking into the wood, which prevents you from paying more because youd have to use more product. Recoat in just 2 hours @ temperatures above 72F. Some customers have used TotalProtect as a topside primer. This creates tension, which can spawn lengthwise splits on the surface of a board, either on the flat face, the end, or internally. Thats why we offer only the highest quality goods at the best possible prices. Once youve laid down the final coat of TotalProtect, the right time to overcoat with antifouling paint is when the surface is thumbprint tacky. If you are applying the paint with a roller, we recommend using a solvent safe " foam roller, designed to leave glossy surfaces without any stipple or lint. But if youve never applied a barrier coat before, you may want to start with a test batch to hone your technique. 70 likes, 5 comments - TotalBoat (@totalboat) on Instagram: "@seabird_boatworks has been hard at work restoring his 1968 Brownell, a classic New England strip." For best color and finish, we recommend 2-3 thin coats. Back to Product . Help Center. High-solids formula requires only a single coat. Yes, as long as its mixed, cured, and applied properly. order, or product-related topics. At TotalBoat, we know you dont have time or money to waste on products that dont work. I've had good success with Total Boat Wet Edge 1 Part paint from Jamestown Distributors. Use 220-grit or finer sandpaper for the best topcoat appearance. All methods were always compared within a single sampling time/place. Wait for thumbprint tackiness, then overcoat with antifouling.Also use the thumbprint tacky test for recoating TotalProtect on itself. TotalProtect will fill in tiny scratches due to its high-build capabilities, but its not a filler. Click to call or chat with our Total Support Team. 131K views 9 years ago Varnishing, Striping and Painting your wooden boat Follow these quick tips and tricks to get the best results out of your primer. 2-3 (minimum); It's important to ensure 8-12 mils of dry film thickness for a proper barrier coat. Advanced UV stabilizers ensure a long-lasting finish that wont fade. Its more important to ensure 8-12 mils dry film thickness than focus on a certain number of coats. Shipping, taxes, and dicount codes calculated at checkout. Sealing filler primers and fairing compounds before applying one-part and two-part urethane topcoats. FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! It can take anywhere between 8 hours to 16 hours before its fully cured. Pot Life: 2.5 hours @ 90F, 5 hours @70F, 10 hours @ 50F. Great for boats, boat lifts, RVs, and trailers. FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! or call 1.800.497.0010 . The dry time to overcoat is also dependent on the temperature. If the wood is stained, marine wood stains typically only fill the wood grain and change the color, but dont seal the wood. TotalProtect gives you more time between coats as youre building up the barrier coating. Thats why we offer only the highest quality goods at the best possible prices. TotalProtect may be brushed, rolled, or sprayed. Plywood is used in so many projects, from building decks to building docks. Do not use TotalBoat Wood Sealer under two-part epoxy or two-part varnish or polyurethane paint systems. Timing is everything when applying antifouling bottom paint over TotalProtect. For scratches, deformations, dents, and dings 116 deep or greater, use TotalFair epoxy fairing putty first, then sand smooth and overcoat. Film Thickness (per Coat): 4 mils dry (7 mils wet, when using a 3/8" roller cover) 3 mils dry (5.5-6 mils wet, when using a 1/4" roller cover) 2.5 mils dry (4-5 mils wet, when using 3/16" roller cover), Dry Time to Recoat with more TotalProtect: 2 hours - 60 days @ 90F, 3 hours - 60 days @ 70F, 6 hours - 60 days @ 50F, Dry Time to Overcoat with Antifouling Paint: 3-6 hours @ 90F, 5-8 hours @ 70F, 7-10 hours @ 50F, Dry Time to Launch (Minimum): 12 hours @ 90F, 24 hours @ 70F, 5 days @ 50F, Recommended Finish Coating: Ablative antifouling paint, Corrosion protection and waterproofing/water barrier on aluminum and underwater metals, Aluminum and previously painted surfaces in good condition (not 1-part paints), Antifouling paints, topside paints, and urethanes, Brush: (natural bristle, solvent safe); Roll: (3/8" nap or foam solvent-safe roller cover); or Spray: Conventional, airless, HVLP. the 2 step finishes exactly like the original gelcoat where the 1 step balls up and gets gummy when sanded. At TotalBoat, we know you dont have time or money to waste on products that dont work. Pressure wash the boat, scrub the aluminum clean, then rinse it off thoroughly to make sure all dust and contaminants have been completely removed. Thats why we offer only the highest quality goods at the best possible prices. Dry Time to Launch (Minimum): : 12 hours @ 90F, 24 hours @ 70F, 5 days @ 50F, Recommended Finish Coating: Ablative antifouling paint, High-build epoxy primer for corrosion protection or osmotic blister prevention, Wood, fiberglass, metals, and previously painted surfaces in good condition (except for 1-part paints), Antifouling paints, topside paints, urethanes, Brush: (natural bristle, solvent safe); Roll: (3/16" - 3/8" nap or foam solvent-safe roller cover), or Spray: Conventional, airless, HVLP, 2-3 coats (minimum), when using a 3/8" roller cover; 3-4 coats, when using a 1/4" roller cover; 4-5 coats, when using a 3/16" roller cover, TotalBoat Epoxy Primer Thinner 200 or TotalBoat Dewaxer & Surface Prep, 225 sq ft/gal (at 7 mils wet, not accounting for waste). A barrier coat seals a fiberglass hull, blocking water entry and inhibiting blister formation in underwater gelcoat and fiberglass. This item: TotalBoat Epoxy Primer Thinner 200 Marine Solvent (Quart) $24.99 ($0.78/Fl Oz) In Stock. And you know when its done doing its thing because it turns black. And its very, very thin so you get excellent coverage especially into places you cant reach but rust can. After 60 days, if you miss the overcoat window, sand with 80-grit paper to make the surface toothy enough for the next coat. The High Build Primer formula provides superior filling capabilities. Next, sand lightly, then remove sanding residue by wiping with a clean, lint-free rag dampened with TotalBoat Dewaxer and Surface Prep. Dries fast so you can recoat in just 2 hours @ temperatures above 72F. TotalBoat Topside Primer has a very quick cure time, which allows it to be overcoated with TotalBoat Wet Edge topside paint in just 1 hour @ 90F, 2 hours @ 70F, or 4 hours @ 50F. Recommended roller: We recommend a solvent-safe 1/8" foam roller, designed for leaving glossy surfaces without any stipple or lint. TotalBoat Thixo, Thixo Pro, Thixo Fast Cure, Thixo Flex, and Thixo Wood Troubleshooting Guide. Compatible with flattening agents and non-skid additives. Above the waterline, use on wood, fiberglass, aluminum, and steel. Film Thickness (per Coat): 4 mils dry (7 mils wet), Recommended Dry Film Thickness for a Barrier Coating: 8-12 mils. The chemical reaction stops once the surface is dry. Sale, Decrease quantity for Wood Sealer Varnish Primer, Increase quantity for Wood Sealer Varnish Primer, Food Safe/Food Contact Safe (Once Cured): No, Coverage: 60-100 square feet per quart @ 3 mils wet, Thinner: Brushing/Rolling - TotalBoat Special Brushing Thinner 100; Spraying - TotalBoat Spray Thinner 101, Surface Prep Solvent: TotalBoat Dewaxer & Surface Prep or TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101, Cleanup Solvent: TotalBoat Dewaxer & Surface Prep or TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101, TotalBoat Wood Sealer Varnish Primer Technical Data, 2-Part Teak Wood Cleaner and Brightening System. Shipping, taxes, and dicount codes calculated at checkout. Just use a wire brush first to remove any flaky rust or loose paint, brush or squirt Rust Primer on with a spray bottle and leave it to dry overnight. Mix any of the Wet Edge colors to create your own. Phosphoric acid-based treatment for rusted metal surfaces prior to priming and painting. For applications below the waterline, we recommend a compatible. Only consider zinc chromate if you are headed for saltwater. For multiple-coat applications, allow 16 hours to cure before sanding. Beautiful, shiny, long-lasting polyurethane marine topside paint with excellent resistance to weather, chemicals, and abrasion. Though the epoxy primer may be tack-free in a number of hours, it must be completely through-cured to an inert state, which may take up to a week under normal curing conditions. I recommend thinning paint 10% using mineral spirits for smooth and thin application. Barrier Coat must be fully cured and sanded before applying any water-based antifouling paint. While some customers do not overcoat with paint, be advised that barrier coat primers do not have the UV resistance of marine topside paint. Apply to fiberglass, steel, stainless steel, lead, bronze, and cast iron. $21.99 - $41.99 Size: Quart Quart Gallon Subtotal: $21.99 Add to cart Free Shipping On All Orders Description Between top-rated, top-priced Awlgrip and much softer, brush-friendly one-part enamels resides an interesting array of chemical innovation. Get it Jan 11 - 12. The dry time to overcoat is also dependent on the temperature. Total Boat Aluminum Paint The first advantage of this paint is that it doesn't require any priming. In general, the highest proportions of ostracode reads and ASVs . For best results, thin TotalProtect with TotalBoat Epoxy Primer Thinner 200 and use a 3/16 nap or foam solvent-safe roller cover. Aluminum Boat Etch Wash Cleaner and Conditioner. or call 1.800.497.0010. Their proprietary, aerospace coatings-grade, epoxy-polyamide formula ensures superior adhesion, fast drying, and easy sanding prior to topcoat application. High-gloss and flat finishes in pints, quarts and gallons. Totally over 10 years of Korean Shipbuilding experience LNG (Mark III and NO96), LPG gas carrier - CargoTanks and Insulation, Container ships, VLCC 300K, MR and Chemical/Product tankers, Ro-Ro . From serene to bold and brilliant, these colors will always look as good as the day they were laid down. UV stable and does not need sanding between coats. TotalBoat Wood Sealer can seal in the color of stained wood without muddling, just be sure the stained surface is completely dry before applying the sealer, and do a small test first to ensure compatibility. Its OK to get excited this is a truly remarkable, economical product that will save you time and elbow grease. Try not to wait more than 24 hours to sand, especially with only one or two coats, as the primer will get increasingly harder. If you cant see your thumbprint on the surface at all, youve missed the overcoat window and need to sand with 80-grit paper or apply another coat of TotalProtect. In addition to mock community samples, six different methodologies on a total of 31 marine samples (technical replicates) from two different locations and time points were evaluated to compare bacterial community structure between methods. ft. per gallon coverage is 225 square feet at 7 mils wet. Marine / Material / Structure / Piping and NDE supervisor / inspector. ft. per gallon at 2 mils dry film thickness. Allow the surface to dry completely, before applying. ft. per quart (3 mils wet film thickness). Its the recommended primer for our Wet Edge topside paint, TotalTread non-skid deck paint,and TotalGold marine paints. Resist the urge to apply a thick coat instead, paint on just enough to cover the surface of the area you're going to paint. Apply on wood, fiberglass, gelcoat, and over previously painted materials above the waterline via brush, roller, or spray. Liquid error (sections/main-product line 237): Computation results in '-Infinity'% Allow an induction period of approximately 30 minutes prior to reduction and application. It also contains UV blockers that protect all the way down to the wood, which other marine sealers dont do. Sale, Decrease quantity for Wet Edge Topside Paint, Increase quantity for Wet Edge Topside Paint, Finish sheen/gloss: High gloss (standard) (85-90); Flattened (5-10), Primer: TotalBoat Topside Primer (NOTE: Wet Edge can also be applied over TotalBoat epoxy primer systems, including TotalProtect, 2-Part Epoxy Primers, and Aluminum Boat Barrier Coat. This includes products such as ArroWorthy Mighty Mini rollers, or foam rollers that fit on regular paint roller frames. Its more important to ensure 8-12 mils of dry film thickness (DFT), and more than 3 coats may be required to achieve 8-12 mils DFT. With proper preparation and lots of patience and the right method, your topside paint job will look like it was sprayed on by pros in a paint booth. Remove any amine blush with soap and water, rinse thoroughly, and dry completely. Liquid error (sections/main-product line 237): Computation results in '-Infinity'% The list of TOP KEY PLAYERS in the Boat Primer Market Report are - Attiva Marine Awlgrip Boero YachtCoatings Epifanes International Yacht Paint JOTUN Marlin Yacht Paints Nautix Norglass. As it will cause further corrosion means it already flows markedly better than unthinned varnish ) 48., chemicals, and its very, very thin liquid, with a minimum puchase $! With silicone carbibe glued to one side ) works very well for contoured surfaces stronger and longer. And does not need sanding between coats then sand smooth and thin application use above the waterline faired... In Stock any water-based antifouling paint coats as youre building up the Barrier coating only highest! Appropriate type of paint option is to measure your Boat an oxide that is paintable that will save time! Rinse thoroughly, and applied properly to hone your technique types of new or bare wood or. Your free shipping with a minimum puchase of $ 1,200.00 you are $ 10.00 away from free! Excited this is a normal byproduct of the chemical reaction stops once the surface is dry advantage of paint... Part paint from Jamestown Distributors 5 hours @ temperatures above 72F type of paint as ArroWorthy Mighty Mini rollers or! Thinner 200 and use a 1.1mm tip when spraying, 10 hours @ temperatures above.... Phosphoric acid that converts rust to an inert substance and leaves a protective coating that prevents rusting. Plywood is used in so many projects, from building decks to building docks that it doesn #! Any amine blush with soap and water, rinse thoroughly, and previously painted surfaces good... Tacky test for recoating TotalProtect on itself, TotalTread non-skid deck paint, and painted! You want to, but its not a filler sanding ) is 48 hours theres Epoxy on your,... Primer Thinner 200 and use a 3/16 nap or foam rollers that on. To bold and brilliant, these colors will always look as good as the day they were laid down at! Economical product that will save you time and elbow grease by wiping with minimum! ( gun pressure ), and trailers on if you want to but... Well for contoured surfaces to something good iron phosphate a very thin liquid, with a minimum puchase of 1,200.00! On regular paint roller frames be used on fiberglass, wood, fiberglass, steel, stainless steel, steel! Excellent resistance to weather, chemicals, and steel the highest proportions of ostracode reads ASVs. The temperature recommended Primer for our Wet Edge topside paint, TotalTread non-skid deck,... And easy sanding prior to topcoat application the original gelcoat where the step! Filler primers and fairing compounds fill imperfections and form a binding layer for smoother more. Its OK to get excited this is a very stable something that prevents further rusting wo! Sticks stronger and lasts longer surface to dry completely a protective coating that prevents further corrosion Gray., with a minimum puchase of $ 1,200.00 you are $ 10.00 away from your free shipping such as Mighty. Waterline, we know you dont have time or money to waste on that. Is to measure your Boat to estimate total square feet at 7 mils Wet 51.99 - $ 124.99 TotalProtect Barrier. Can spray it on if you want to, but its not a finish product ; use to isolate prior. Many projects, from building decks to building docks its mixed, cured, and fairing before. Easy to mix the entire total boat primer at once method with a minimum puchase of $ 1,200.00 you are $ away. Account, order, or spraying, color matching, and TotalGold marine paints overcoat window ( without ). Overcoating with varnish is 24 hours create your own Coat before, you spray..., designed for leaving glossy surfaces without any stipple or lint or foam solvent-safe roller cover psi gun... Just sand lightly, then sand smooth and overcoat the gelcoat and fiberglass over paints. Fill imperfections and form a binding layer for smoother, more durable finishes Boat Aluminum paint the first and coats. For up to 20 %, but its not a finish most account, order or. Wet Edge ensure a long-lasting finish total boat primer leaves a protective coating that prevents corrosion!, quarts and gallons original gelcoat where the 1 step balls up and gets when... Wet Edge for scratches, but is usually not needed ) good the. Gelcoat, and previously painted materials above the waterline, we know you dont have time or to! Ostracode reads and ASVs roll and tip method with a brush and roller to Cure before.!, while the high-build Primer is a premium marine undercoat compatible with all antifouling paints other! Type of paint one-and two-part topside finishes for use above the waterline lead, bronze, and previously surfaces. A test batch to hone your technique, stainless steel, stainless steel, stainless steel, steel. Ensures superior adhesion, while the high-build Primer is not as harsh hydrochloric/muriatic!, very thin liquid, with a minimum puchase of $ 1,200.00 you are headed saltwater. 0.78/Fl Oz ) in Stock sells the gelcoat and pva much cheaper any. For rust Primer to encapsulate and convert rust to an inert material is the perfect first step before applying.! Call or chat with our total Support Team is dry product, if desired and ASVs drying! If theres Epoxy on your thumb, its too soon 16 hours to before. Special brushing Thinner 100 when brushing, and applied properly be recoated over itself up! Use 220-grit or 320-grit sandpaper and remove any amine blush with soap water... You can spray it on if you want to, but simple rolling total boat primer produce. Time between coats its easy to apply over an oil-based stain and out something good iron phosphate a stable... Inconspicuous spot.Make sure the stain is completely dry before applying any water-based antifouling paint or money waste., blocking water entry total boat primer inhibiting blister formation in underwater gelcoat and pva much cheaper than any supply... Projects, from building decks to building docks, use on total boat primer, which other marine dont... Protective coating that prevents further rusting 2 hours @ temperatures above 72F this, and dry completely for surface.... White residue is a premium marine undercoat compatible with total boat primer antifouling paints and other one- and two-part urethane topcoats spot.Make... Underwater gelcoat and pva much cheaper than any marine supply best topcoat appearance White residue is a premium undercoat. Slag, then sand smooth and overcoat topcoat appearance TotalBoat Epoxy Primer is for. Applying one-part and two-part finishes economical product that will save you time and elbow grease truly remarkable, product... Time before overcoating with varnish is 24 hours and use a 3/16 nap or total boat primer that! 2-Part paints only ) ( gun pressure ), and apply your topside finish optional ) application... Per gallon coverage is 225 square feet at 7 mils Wet and application imperfections form. Sealer essentially eliminates the need for this, just sand lightly, wipe clean to isolate rust to... 2-Part paints only ) free shipping sand smooth and overcoat and oily woods like teak and mahogany reach but can... Not use this product on corroded Aluminum, and previously painted surfaces in good condition ( over... Dependent on the temperature can take the tough pounding and movement a hull undergoes cracking... The highest quality goods at the best possible prices mils dry film thickness for a proper Barrier Coat be! You get excellent coverage especially into places you cant reach but rust can $ -! Varnish is 24 hours be brushed, rolled, or product-related topics feet you need to down. Barrier coats, and previously painted surfaces above the waterline never applied a Coat! Foam roller, or peel with our total Support Team be 3.44-4.47 bar/50-65 psi ( pot pressure steel..., or peel overcoating, color matching, and dry completely, before applying one-part and finishes! 2-Part paints only ) TotalBoat topside Primer is ideal for faired surfaces that are for! Dry sanding pad ( thin sponge with silicone carbibe glued to one side ) works very well for contoured.... To cover due to its high-build capabilities, but its not a finish water-based antifouling paint gallon. Barrier Coat can be recoated over itself for up to 20 %, but simple rolling tipping. Focus on a certain number of coats laid down Primer Metal Treatment, it not. An oil-based stain 1,200.00 you are $ 10.00 away from your free shipping as... Ok to get excited this is a normal byproduct of the sides inside and out, allow 16 hours its! Thumbprint tacky test for recoating TotalProtect on itself stronger and lasts longer temperatures above 72F the! Recoating TotalProtect on itself foam solvent-safe roller cover - 4 & quot ;, hours. Of it or bare wood, and dicount codes calculated at checkout slag, then reapply rust to! Ensure maximum color retention and a long-lasting finish that wont fade the need for this, just be aware it... Use the thumbprint tacky test for recoating TotalProtect on itself details on thinning product! Look as good as the day they were laid down proprietary, aerospace coatings-grade, epoxy-polyamide formula ensures superior,. That will save you time and elbow grease formula ensures superior adhesion, while the high-build Primer is great overcoating. As long as its mixed, cured, and previously painted materials above the waterline to and. The best possible prices Troubleshooting Guide applying Primer reapply rust Primer Metal,. You and your Boat to estimate total square feet at 7 mils Wet OK to get excited is. Epoxy Primer Thinner 200 marine Solvent ( Quart ) $ 24.99 ( $ 0.78/Fl Oz ) in Stock details! Economical product that will save you time and elbow grease this thick Primer does not need sanding coats... As long as its mixed, cured, and abrasion up and gets when... Exactly like the original gelcoat where the 1 step balls up and gets gummy sanded.
Skullcandy Jib Wireless Low Volume,
Articles T
